WEKO3
-
RootNode
アイテム
光照射器と照射条件がコンポジットレジン硬化体の諸性質に及ぼす影響
https://ohu-lib.repo.nii.ac.jp/records/2156
https://ohu-lib.repo.nii.ac.jp/records/2156a01150d9-e1a3-4372-a508-c825e978611a
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
KJ00000731679.pdf (764.7 kB)
|
|
| Item type | 紀要論文(ELS)_JAIRO Cloud（WEKO3）対応_596d4a9f(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2003-06-30 | |||||
| タイトル | ||||||
| タイトル | 光照射器と照射条件がコンポジットレジン硬化体の諸性質に及ぼす影響 | |||||
| タイトル | ||||||
| タイトル | Influence of Curing-light Unit and Exposure Conditions on the Properties of Lightcured Resin Composite on Curing-light Units | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | jpn | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | curing light unit | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | light-cured resin composite | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | rise in temprature | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | mechanical properties | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | departmental bulletin paper | |||||
| ページ属性 | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | P(論文) | |||||
| 記事種別(日) | ||||||
| 値 | 原著論文 | |||||
| 記事種別(英) | ||||||
| 言語 | en | |||||
| 値 | Original Article | |||||
| 著者名(日) |
岡田, 英俊
× 岡田, 英俊× 石田, 喜紀× 野口, 博志× 長山, 克也 |
|||||
| 著者名よみ |
オカダ, ヒデトシ
× オカダ, ヒデトシ× イシダ, ヨシキ× ノグチ, ヒロシ× ナガヤマ, カツヤ |
|||||
| 著者名(英) |
OKADA, Hidetoshi
× OKADA, Hidetoshi× ISHIDA, Yoshiki× NOGUCHI, Hiroshi× NAGAYAMA, Katsuya |
|||||
| 著者所属(日) | ||||||
| 値 | 奥羽大学歯学部歯科理工学講座 | |||||
| 著者所属(日) | ||||||
| 値 | 奥羽大学歯学部歯科理工学講座 | |||||
| 著者所属(日) | ||||||
| 値 | 奥羽大学歯学部歯科理工学講座 | |||||
| 著者所属(日) | ||||||
| 値 | 奥羽大学歯学部歯科理工学講座 | |||||
| 著者所属(英) | ||||||
| 言語 | en | |||||
| 値 | Department of Dental Materials Science, Ohu University School of Dentistry | |||||
| 著者所属(英) | ||||||
| 言語 | en | |||||
| 値 | Department of Dental Materials Science, Ohu University School of Dentistry | |||||
| 著者所属(英) | ||||||
| 言語 | en | |||||
| 値 | Department of Dental Materials Science, Ohu University School of Dentistry | |||||
| 著者所属(英) | ||||||
| 言語 | en | |||||
| 値 | Department of Dental Materials Science, Ohu University School of Dentistry | |||||
| 抄録(英) | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | The purpose of this study was to examine the influence of curing light units and exposure conditions on the prperties of the polymerization of a lightcured resin composite. Lightfil was used as a resin composite. The curing light units used were a JETLITE, as a halogen lamp curing light source (HAL), a MICROWAVE, as a xenon lamp curing light source (XEN), and a AQUABLUE, as a light-emitting diode curing light source (LED). Each curing light unit was used to cure the resin composite with the irradiation periods according to the manufacture's instructions. The rise in temperature of sruide tip with curing light units during irradiation, and the depth of polymerization, diametral tensile strength, vickers hardness (HV) and polymerization shrinkage of resin composite lightcured were determined. The results obtained were as follows. 1. Greatest rise in temperative of guide tip and shallow polymerization depth of resin composite was observed when XEN curing light unit was used to cure the resin composite as compared with those using HAL and LED. 2. A small HV and diametral tensile strength value were obtained when XEN was used to cure the resin composite as compared with those using HAL and LED. 3. The kind of light source curing unit had no signficant influence on the polymerization shirinkage of resin composite. | |||||
| 雑誌書誌ID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AN1010214X | |||||
| 書誌情報 |
奥羽大学歯学誌 巻 30, 号 2, p. 168-174, 発行日 2003-06-30 |
|||||
