WEKO3
-
RootNode
アイテム
各種ボンディングシステムの接着性評価(2)エナメル質について
https://ohu-lib.repo.nii.ac.jp/records/2485
https://ohu-lib.repo.nii.ac.jp/records/2485fceef04c-47e2-4261-9111-a2b151951d10
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
|
Item type | 紀要論文(ELS)_JAIRO Cloud(WEKO3)対応_596d4a9f(1) | |||||
---|---|---|---|---|---|---|
公開日 | 2006-03-31 | |||||
タイトル | ||||||
タイトル | 各種ボンディングシステムの接着性評価(2)エナメル質について | |||||
タイトル | ||||||
タイトル | Evaluation of Adhesive Strength and Durability of Different Bonding Systems (2) Enamel | |||||
言語 | en | |||||
言語 | ||||||
言語 | jpn | |||||
キーワード | ||||||
言語 | en | |||||
主題Scheme | Other | |||||
主題 | bonding system | |||||
キーワード | ||||||
言語 | en | |||||
主題Scheme | Other | |||||
主題 | adhesive durability | |||||
キーワード | ||||||
言語 | en | |||||
主題Scheme | Other | |||||
主題 | enamel | |||||
資源タイプ | ||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
資源タイプ | departmental bulletin paper | |||||
ページ属性 | ||||||
内容記述タイプ | Other | |||||
内容記述 | P(論文) | |||||
記事種別(日) | ||||||
値 | 原著論文 | |||||
記事種別(英) | ||||||
言語 | en | |||||
値 | Original Article | |||||
著者名(日) |
岡田, 英俊
× 岡田, 英俊× 石田, 喜紀× 野口, 博志× 福井, 和徳× 菊井, 徹哉× 長山, 克也 |
|||||
著者名よみ |
オカダ, ヒデトシ
× オカダ, ヒデトシ× イシダ, ヨシノリ× ノグチ, ヒロシ× フクイ, カズノリ× キクイ, テツヤ× ナガヤマ, カツヤ |
|||||
著者名(英) |
OKADA, Hidetoshi
× OKADA, Hidetoshi× ISHIDA, Yoshinori× NOGUCHI, Hiroshi× FUKUI, Kazunori× KIKUI, Tetsuya× NAGAYAMA, Katsuya |
|||||
著者所属(日) | ||||||
値 | 奥羽大学歯学部生体材料学講座 | |||||
著者所属(日) | ||||||
値 | 奥羽大学歯学部生体材料学講座 | |||||
著者所属(日) | ||||||
値 | 奥羽大学歯学部生体材料学講座 | |||||
著者所属(日) | ||||||
値 | 奥羽大学歯学部成長発育歯学講座歯科矯正学分野 | |||||
著者所属(日) | ||||||
値 | 奥羽大学歯学部歯科保存学講座 | |||||
著者所属(日) | ||||||
値 | 奥羽大学歯学部生体材料学講座 | |||||
著者所属(英) | ||||||
言語 | en | |||||
値 | Department of Biomaterials Science, Ohu University School of Dentistry | |||||
著者所属(英) | ||||||
言語 | en | |||||
値 | Department of Biomaterials Science, Ohu University School of Dentistry | |||||
著者所属(英) | ||||||
言語 | en | |||||
値 | Department of Biomaterials Science, Ohu University School of Dentistry | |||||
著者所属(英) | ||||||
言語 | en | |||||
値 | Division of Orthodontics and Dentofaicial Orthopedics, Department of Oral Growth and Development, Ohu University School of Dentistry | |||||
著者所属(英) | ||||||
言語 | en | |||||
値 | Department of Conservative dentisitry, Ohu University School of Dentistry | |||||
著者所属(英) | ||||||
言語 | en | |||||
値 | Department of Biomaterials Science, Ohu University School of Dentistry | |||||
抄録(英) | ||||||
内容記述タイプ | Other | |||||
内容記述 | The purpose of this study was to examine and evaluate a possible influence of individual processes in the bonding systems on the adhesive durability of resin composite to enamel. The experiments were performed by 5 dentists. Bovine enamel was used as an adhered, while 6 kinds of bonding systems were used in the experiment. Adhesive specimens were prepared at 23±2℃ room temperature and 50±5% relative humidity. The adhered area was standardized to be 6mm in diameter by means of masking tape. The adhesive specimens were subjected to durability test by immersing in distilled water at 37℃ for 24 hours (CO) and 30000 cycles of thermal stress at 4-60℃ (TH). After completion of the durability test, shear bond strength test was performed by using an universal testing machine to determine the adhesive strength. The significant difference was then assessed by One way ANOVA and Tukey's HSD test. The results obtained were as follows: 1. No significant difference was observed in bond strength in the bonding system which adopted acid processing of phosphoric acid among 5 dentists. 2. Significant difference was observed in bond strength in the bonding system which adopted acid processing of 10% citric acid-3% ferrous chloride between 5 dentists. 3. Significant difference was observed in bond strength in the bonding system which adopted selfetching primer among 5 dentists. | |||||
雑誌書誌ID | ||||||
収録物識別子タイプ | NCID | |||||
収録物識別子 | AN1010214X | |||||
書誌情報 |
奥羽大学歯学誌 巻 33, 号 1, p. 35-40, 発行日 2006-03-31 |